Sinota交錯式PFC超薄大功率電源
（1）輸入90Vac-264Vac，輸出28V/300W （2）尺寸：158mm*77mm*13.8mm高(PCB板上10mm) （3）效率95.5%（100%載）at 230Vac輸入，95% at 115Vac輸入 （4）PF>0.96 at 50%載（264Vac），>0.91 at 30%載（264Vac） （5）空載功耗<150mW at 230Vac(方案中含有LDO*2，增加了待機功耗) (6) 采用NXP TEA2376 TEA2226 TEA2095 TEA2209 (7) 采用英諾賽科GaN INN650D080BS INN700D140C

Sinota 600W PC power solution
1. 輸入90Vac-264Vac，輸出600W/12V 2. 效率高達95.44%（100%載）在230Vac輸入，94.64%（50%載）在115Vac輸入 3. 待機功耗82mW在115Vac輸入 4. 元器件相對CM LLC方案減少100PCS左右 6. 采用NXP TEA2017 TEA2095 TEA2209

Sinota 150W PD GaN charger Solution
1. 輸入90Vac-264Vac，輸出150W/21.5V 2. 功率密度高達31.3W/cm3，DEMO尺寸65mm*55mm*22mm 3. 效率高達95.5%在230Vac輸入 4. PFC頻率200kHZ，LLC頻率250kHZ 5. 采用NXP TEA2017 TEA2095 TEA2206 6. 采用英諾賽科GaN INN650DA260A

Sinota LLC大功率電源方案
1. It supports charging of lithium batteries from 7 to 24 strings, and the maximum power can reach 500W 2. There is no auxiliary power supply, which reduces costs and meets safety standards and various energy efficiency standards 3. LLC has high efficiency, small heat generation, and superior EMI performance 4. Built-in X-capacitor discharge function, safe, low standby power consumption 5. The power density is large, the volume is small, and there is no need for a fan to dissipate heat 6. Perfect protection mechanism (overvoltage, overtemperature, overcurrent, short circuit protection, overcharge and anti-reverse connection, etc.) 7. MCU intelligently manages lithium battery charging to ensure charging safety and prolong battery life. At the same time, it can reserve upgrades and customize personalized functions 8. NXP TEA19161 inside

Sinota TEA1755 power solution
1. Support 1 string to 13 string lithium battery charging, the maximum power can reach 150W 2. Built-in PFC controller, in line with safety certification and various energy efficiency standards 3. Optional output protocol (PD protocol or custom private protocol) 4. Perfect protection mechanism (overvoltage, overtemperature, overcurrent, short circuit protection, overcharge and anti-reverse connection, etc.) 5. High power density, small size, no need for fan for heat dissipation 6. Intelligent control of lithium battery charging to ensure charging safety and prolong battery life. At the same time, it can be reserved for upgrading and customizing personalized functions.

Sinota 65W集成GaN PD充電器方案
1. 南芯SC3057內置GaN方案，ATQ23.7繞線式變壓器 2. 高功率密度 1.91W/cm3 3. 輸入100Vac/60Hz-240Vac/50Hz 4. 輸出 5V/9V/12V/15V@3A，20V@3.25A 5. 支持PD2.0/PD3.0-PPS、FC2.0、FC3.0、FCP、SCP、VOOC等多種快充協議 6. 同步整流用SC3503,協議用SC2151A

Sinota 30W GaN PD充電器方案
1. 采用南芯SC3056內置GaN方案，DFN5*6封裝 2. 功率密度高達 2.14W/cm3 ，設計尺寸29mm*23.5mm*22.6mm 3. 輸入90Vac/60Hz-240Vac/50Hz 4. 輸出 5V/9V/12V@3A，15V@2.5A,20V@2A，在90V滿載下輸出端口效率大于92.2% 5. 支持PD2.0/PD3.0-PPS、FC2.0、FC3.0、FCP、SCP、VOOC等多種快充協議

NXP PD3.0 QC4.0 QC4.0 PPS Power turnkey solution
1. Support USB PD3.0, QC4.0/3.0/2.0, BC1.2 multiple protocols. The maximum output power is 27W, which can be upgraded to 18W, 45W and 65W by adjusting the protocol and peripheral power devices. 2. Meet all DO EU-CoC Tier2 energy efficiency requirements (>91%@12V/2.1A or 5V/5A) no-load standby power consumption <30mW). 3. The system hardware integrates 20 abnormal protection modes to ensure system safety to the greatest extent. 4. A single protocol chip can implement multiple protocols, improving system flexibility and platform consistency. 5. Compatible devices: Iphone6/7/8/X, Ipad/Macbook/Pro, Samsung S8/S6, Huawei Mate9 P9, Xiaomi 6, etc. 6. NXP TEA19361 TEA1993 inside

Sinota PD3.0 多口旅充方案
1. The total power is 30W, the maximum output of port C is 27W, and the maximum output of port A is 12W. The two ports work at the same time and automatically allocate power output. By adjusting the power device, it can be upgraded to 65W, and the protocol board can be upgraded to 4-port output. 2. The C port supports USB PD3.0, QC4.0/3.0/2.0, BC1.2 multiple protocols. 3. The system hardware integrates 20 abnormal protection modes to ensure system safety to the greatest extent. 4. A single protocol chip can implement multiple protocols, improving system flexibility and platform consistency. 5. Compatible devices: Iphone6/7/8/X, Ipad/Macbook/Pro, Samsung S8/S6, Huawei Mate9 P9, Xiaomi 6, etc. 6. NXP TEA19361 TEA1993 inside

Sinota無線充移動電源
1. The mobile power supply adopts Buck-boost SC8913, the maximum power is 24W 2. Support PD2.0 (two-way) and USB-A port output, wireless charging output power 5W, upgrade protocol chip, you can upgrade to PD3.0 PPS. 3. Built-in MCU control, freely switch wireless and wired charging and discharging 4. Built-in multiple protection modes such as over current, over temperature, over voltage, short circuit protection, etc. 5. PD compatible devices: iphone8 iphoneX Macbook, Samsung S8 Huawei Mate9/P9, etc. 6. Wireless charging compatible devices: Iphone8, iphoneX, Samsung S8 Note5, etc. 7. NXP NXQ1TXH5/101J inside

Sinota 15W無線充方案
1. 支持BPP5W、EPP10W、EPP15W 2. 集成高效率全橋驅動、4顆低Ron MOS、高精度電壓電流檢測、電壓電流雙路解調 3. 集成Q值檢測功能，高精度的FOD 4. 支持QC/PD/FCP/SCP/AFC快充協議輸入 5. 支持欠壓、過壓、過流、過溫保護 6. 采用南芯SC9608

Sinota 5W 無線充方案
1. Maximum input power 8W, output 5W 2. The wireless controller has built-in MOS and operational amplifier, with simple peripherals and high cost performance 3. The conversion efficiency is 87%, the system efficiency is 74%, in line with WPC 1.2.3 4. High-precision FOD detection, which can identify foreign objects such as rings 5. Using DSP core, power as low as 10mW 6. Capacity equipment: Iphone8 iphoneX Samsung S8 Note5 etc. 7. NXP NXQ1TXH5/101J inside

Southchip SC8701 car chargr PD solutionu
1.60W PD 2. Support QC3.0, MTK PE, FCP, Apple Samsung BC1.2 3. High efficiency buck-boost conversion 4. Dynamic adjustment of output voltage 5. Ultra-wide input voltage range: 2.7 V to 36V (40V peak voltage)

Sionta drone charger solution
1. High power output up to 88W 2. High efficiency buck-boost conversion 3. Light load automatically enters power saving mode 4. Support normal A port discharge 5. Synchronous 4-pipe buck-boost controller

Sinota USB HUB power solution
1.60W PD 2. Support QC3.0 3. Support BC1.2, Apple Samsung 4. Up to 8 5V 2.4A USB-A 5. Large current

Sinota wireless power bank solution
1. Using MCU IP5310 NXP (NXQ1TXH5) wireless charging architecture 2. Type-C input interface, 1 Micro USB input interface, 2 USB A output interfaces 3. Support WPC 1.2 QI standard 4. Integrated high-efficiency full-bridge power MOS 5. Few external components are required, minimizing cost and board space 6. Standby (waiting state) power 10 mW (typical) 7. Smart Power Limit (SPL) function to adapt to the limited output 5 V power supply 8. Support over current, over voltage, over temperature protection Application areas: smart phones, game consoles, notebooks and other portable electronic devices

Sionta Car ignition Solution
1. QC output 2. Buck reverse discharge output 3. With battery protection balance 4. Support ordinary double A port discharge 5. Monitoring of charge and discharge status, undervoltage and overvoltage protection

Sinota wall chargter QC solution
1. Wall charging mobile power supply 2. Support filling and discharging at the same time 3. Support QC discharge 4. Support common A-port discharge 5. Efficiency up to 95% 6. Southchip SC8803 inside

Sinota石墨烯QC方案
1. 3 2000mAh 18650 graphene cells 2. 12V 10A DC charging, 10 minutes full 3. Support QC discharge 4. Support 5V 2A discharge of ordinary usb-a port 5. Protection and balance function 6. SC8802 inside

Sionta汽車緊急啟動電源
1. 支持PD,QC3.0 2. 雙A 口 5V 2A 3. 888數碼管顯示 4. 有電池保護平衡 5. 雙點煙器 6. 采用南芯SC8802